Applying Steam Turbines For Pump Drives (TP002)  
John Elmore  -  Randy Palmer

The Effect of HVOF Thermal Spray on the Elevated Temperature High Cycle Fatigue Behavior of a Martensitic Stainless Steel (TP101)  
Dresser-Rand

Fatigue Damage of Steam Turbine Blade Caused by Frequency Shift Due to Solid Buildup-A Case Study  (TP110) 
Murari P. Singh  - Terry Matthews - Charles Ramsey

Frequency Evaluation of a Steam Turbine Bladed Disk (TP023) 
Jim Dello

Improving Critical Speed Calculations Using Flexible
Bearing Support FRF Compliance Data (TP109)
John C. Nicholas  - John K. Whalen - Sean D. Franklin

Operating Turbomachinery on or Near the Second Critical Speed in Accordance with API Specifications (TP022) 
Dresser-Rand, Wellsville

Optimization of a Leading Edge Groove Tilting Pad Journal Bearing for Application in a Small, High Speed Multi-Stage Steam Turbine (TP008)  
Stephen L. Edney - John K. Waite - Scan M. Decamilo

Pad Temperature in Tilting Pad Journal Bearing Influenced by Operation at High Speed and Light Loads (TP104)
Dresser-Rand

Performance Acceptance Test for a Non-Condensing
Turbine Generator Drive (TP026) 
Joseph Lamberson - Randy Moll

Probabilistic Estimation of the Effect of Dimensional Tolerance for Turbine/Compressor Blade Attachment (TP021)  
Murari Singh

Profiled Leading Edge Groove Tilting Pad Journal
Bearing for Light Load Operation (TP107)
Stephen L. Edney   - John K. Waite - Scan M. DeCarnillo

SAFE Diagram - A Design and Reliability Tool 
For Turbine Blading (TP024) 
Murari Singh - Donald Schiffer - Jim Dello

SAFE Diagram - A Dresser-Rand Evaluation Tool for
Packeted Bladed Disc Assembly (TP025)  
Murari Singh

Shifting Critical Speed Out of the Operating Range by Changing From Tilting Pad to Sleeve Bearings (TP108)
John C. Nicholas  - Randall W. Moll