Form No.    Description  - PDF files
DI-14 Type GS-1W and GS-2W Structural Bolting Requirements
DI-13 Hydraulic Trip Valve Assembly used on Type CS and CCS Turbine Drives for HPCI Pumps
DI-12 Oil Flooding of the GS-N Type Turbine
DI-11 Limited Life of the Reversing Chamber Hold Down Screws for "CS" Nuclear Turbine Pump Drives
DI-10 Limited Life of the Reversing Chamber Clamping Plate Hold Down Screws for "CCS" Nuclear Turbine Pump Drives
DI-9 Damage Occurring to the Turbine Governor Valve Stem Gland Air Seal Piping Connection Prior to Installation
DI-8 Type GS-N Turbine Valve Plug Moving from the Open Position to the Full Closed Position.
DI-6 Woodward governor EG-R actuator oil sump, sump support bracket and associated piping for type GS(N) turbines.
DI-5 Multi-valve bar lift linkage assembly type CS & CCS turbine drives for H.P.C.I. pumps
DI-4 Multi-valve bar lift linkage assembly type CS & CCS turbine drives for H.P.C.I. pumps
DI-3 Lock-down tab to prevent the two coupling end pedestal to base hold-down bolts from loosening during a seismic event
DI-2 Multi-valve bar lift linkage assembly type CS & CCS turbine drives for H.P.C.I. pumps
DI-1 Terry "GS" Turbine Woodward governor EG-R actuator oil sump support

 

 
 

© Dresser-Rand 2008 All Rights Reserved. Privacy Policy & Terms of Use